Woodworking 101: Everything You Need To Know

Working with wood can create a vast array of products which can be used throughout your life. You can build a bench for your yard, a crib for your baby or a desk for your office. No matter what you plan to build, the tips found in the following paragraphs will help you get the job done.

Consider making your own sanding blocks that are reusable. Cut 6 blocks from scrap wood in the size of the sandpaper you use. Each block should be about 2 inches by 4 inches. Apply spray adhesive to each of the tile squares and the blocks themselves. If the cork is too large, trim it with a utility knife. Spray adhesive on your sandpaper, and then stick it to every cork block, facing down. You can make smaller blocks if you wish as well. These can be used for smaller pieces demanding finer sanding.

Test stain in an area that will not be seen or on a scrap piece of wood. This can help you avoid surprises in case your stain color is different after you’ve applied it. Wood is pretty unpredictable, so doing this small test can help you avoid any errors.

If you have been doing woodworking for some time now you may want to think about using your skills to make your own furniture. If you already have all that you need you could even do this as a service to those that are less fortunate than you. It is a great way to share your passion with others.

When sanding a piece of lumber, beginning with a coarse sandpaper. Remove the excess dust from the lumber. Then, once the largest scratches are removed, sand again with a smoother sandpaper. Follow this sanding with a tack cloth. Continue using smoother sandpaper until the lumber feels smooth when you run your hand across it.

If you are bored using power tools for your woodworking project, try your hand at using classic manual tools. For hundreds of years people used no power in their woodworking. Everything was done by hand. It is a challenging way to add some excitement and pride to your next woodworking project.

Unless you are charging it, never leave your tools plugged in and unattended. You never know who might approach your tool, accidentally setting it off. Not only can this damage the items around it, but the person could be hurt and you could be left liable for the end result.

Make sure your workbench is the proper height. It really can make a big difference. It needs to fit you and how you work. Usually if you are around 5’6″ to 5’9″ you probably need one that is between 33″ and 36″ high. If you are 5’10” or taller, you may need one that is between 35″ and 37″ high. Use your bench at its current height to determine if you need to change it to work better for you.

Now that you know so much about woodworking, and how to do it better, you can choose any project which tickles your fancy and tackle it with confidence. Once you are able to get that job done, you’ll find the world is your oyster. Dream big and achieve greatness!